> ## Content Index
> Fetch the complete content index at: https://lightworksguide.net/llms.txt
> Use this file to discover other available public pages before exploring further.

# Trim Video Without Trimming Its Audio in Lightworks
- URL: https://lightworksguide.net/fix/lightworks-track-sync-independent-trim/
- Published: 2026-11-05T15:00:00.000Z
- Updated: 2026-11-16T21:37:53.000Z
- Author: Lucas Bennett
- Tags: fix

To trim a picture edge on its own, **Alt-click that edge**. In the [current documented trimming workflow](https://lwks.com/lightworks-knowledge-base/trimming), this restricts the trim and sync movement to the clicked track and its grouped tracks. Other tracks stay put. If you need other tracks to follow a ripple, use the separate plain-click route below.

Opening only the picture edge and keeping other tracks in place are different decisions. **Sync** controls a one-sided trim's ripple, while track targets, Alt-narrowed sync and locks affect participation. A plain click with **Clip Link off** opens only the clicked clip without imposing Alt's sync restriction. Settle whether sound should stay put or follow before you open the trim; that answer picks the route.

These instructions use the [v2026 track headers and trimming model](https://lwks.com/whats-new). In older layouts, track names and enable controls can look different. Here, the full-height V1/A1 buttons are edit targets; the separate padlock is Lock, and the thin amber line beside a target is its Track Sync strip.

## Check the edit you want to change

Find the intended sequence and the start or end of the picture clip. Note the linked audio's boundary, a recognisable picture/sound event near the edit, and where a later cut sits. These give you concrete before-and-after checks: which edge changed, what moved downstream and whether the sound still lands on the intended action.

The picture track must be editable. The [track Lock excludes a track from editing, trimming, selection and sync movement](https://lwks.com/lightworks-knowledge-base/sequences-and-timelines). [Check the lock on the track you mean to trim](https://lightworksguide.net/fix/lightworks-audio-level-editing-locks-timeline/) instead of unlocking the whole timeline. Targeting a track is a different control and doesn't give the same protection.

**Mute is not edit protection.** The audio track's Monitor button changes what you hear; it does not stop that track being trimmed or moved. Use Lock for protection, and keep **Keyframes off on a protected sound track**: turning Keyframes on unlocks the track. The [current header controls distinguish all three states](https://lwks.com/lightworks-knowledge-base/sequences-and-timelines).

I wouldn't experiment on an important edit without a rollback point. [Lightworks saves work continuously and has no Save command](https://lwks.com/lightworks-knowledge-base/projects), so autosave isn't a separate preserved copy. A [project archive can include logs and media, or logs only with media supplied separately](https://lwks.com/lightworks-knowledge-base/archiving-and-restoring-work). Choose the coverage your rollback needs.

## Open a picture-only mouse trim

Turn off the timeline's [Cut and Selection tools](https://lwks.com/lightworks-knowledge-base/timeline-tools-and-commands) before aiming at an edge: they split clips or select blocks, while this procedure opens a trim. Keep Clip Link on for ordinary linked editing. For a picture-only trim that leaves the other tracks in place, Alt-click the picture edge. If unlocked sound must follow a ripple, temporarily turn [Clip Link off](https://lwks.com/lightworks-knowledge-base/selecting-and-moving-material) and use a plain click instead. Restore the intended Clip Link state after the edit.

1. Hover near the picture clip's **end** to change its outgoing boundary, or near its **start** to change its incoming boundary. The [trim guide uses white hover brackets to identify a cut point](https://lwks.com/lightworks-knowledge-base/trimming).
2. Hold **Alt** and click the picture edge when the trim should be confined to that track and its grouped tracks. To open only the picture edge while allowing other tracks to follow, turn **Clip Link off** and use a plain click.
3. Inspect the opened trim before adjusting it. Check the active brackets are on the intended side of the picture clip and that its linked audio edge has not also opened. The curled clip edge identifies an unjoined cut.
4. Choose how later material should move, as described below, before adjusting the cut. If you opened with Alt but now want other tracks to follow, close the trim and reopen the edge with Clip Link off and a plain click. Inspect the amber sync strips.
5. Adjust the edge with a drag, or press **Left/Right** to nudge an open trim by one frame. **Shift+Left/Right** moves it ten frames. If using playback to change the trim, check **Trim when playing**; with it off, playback only inspects frames. Timeline settings has separate **Click and Drag - Natural Trim** and **Unjoin - Natural Trim** toggles; they change how dragging looks, not which media is trimmed.
6. Close the trim, then compare the picture edge, audio boundary and downstream positions with the observations you made before the change.

[![V1 outgoing picture edge open for an Alt trim; associated A1 and A2 audio edges closed and only the V1 sync strip lit.](https://lightworksguide.net/content/images/2026/11/lwg-picture-trim-alt-ui-20261116.webp)](https://lightworksguide.net/content/images/2026/11/lwg-picture-trim-alt-ui-20261116.webp)

Alt-click opens the picture edge and narrows sync to that track and its grouped tracks. The associated audio edges stay closed; other tracks stay put.

**Alt trimming is different from Alt selection.** The [selection and movement guide explicitly separates the rules](https://lwks.com/lightworks-knowledge-base/selecting-and-moving-material): selection or movement can invert Clip Link for one click; an Alt trim narrows the trim and sync to the clicked track and grouped tracks. Grouped stereo or stereoscopic pairs remain together. Neither route permanently unlinks the clips.

If clicking does not open the trim, check **Click To Unjoin (Trimming)** on the Timeline settings **Behaviour** tab. The [setting defaults on; with it off, the guide provides click-and-drag trimming](https://lwks.com/lightworks-knowledge-base/trimming). Keyboard and Trim-menu unjoins remain available, but keyboard trims follow a different targeting rule.

Different picture and sound edges can be intentional. The [audio-editing guide describes J-cuts and L-cuts with sound and picture changing at different moments](https://lwks.com/lightworks-knowledge-base/editing-audio-in-the-timeline). Judge the boundary against your editing intention rather than forcing both edges back together.

## Choose downstream movement separately

The opened ends show whose media you intend to trim. Now check whether later material should ripple and which tracks will participate. Use **Sync**, the target buttons, amber sync strips and locks; remember that an Alt trim has already narrowed participation.

### Keep later cuts at their current positions

For a one-sided trim that should leave later positions unchanged, set **Sync off**. Open the timeline's **Settings > Behaviour** and check **Sync Off Action**. Its default is **No Tracks Ripple (Drag in Black)**: shortening leaves black, while lengthening uses adjacent black. I'd keep that default: the legacy **Only Target Tracks Ripple** choice in the [current trimming settings](https://lwks.com/lightworks-knowledge-base/trimming) ripples the targeted tracks instead.

[![Sync off: picture A ends at 4 seconds with black to 6; picture B and intact stereo audio retain their positions.](https://lightworksguide.net/content/images/2026/11/lwg-picture-trim-black-ui-20261116.webp)](https://lightworksguide.net/content/images/2026/11/lwg-picture-trim-black-ui-20261116.webp)

In this example, shortening picture A leaves black from 4 to 6 seconds. With Sync off and No Tracks Ripple (Drag in Black), the later cut and sound keep their positions.

With the default no-ripple action, shortening leaves black beside the adjusted edge. Inspect that space and the resulting boundary. Extension still needs available source frames and adjacent space; turning off sync doesn't create either.

For a temporary Drag In Black shortcut, turn **Clip Link off**, then hold **Ctrl** on Windows/Linux or **Cmd** on macOS as you click the picture edge. The [Ctrl/Cmd trim modifier](https://lwks.com/lightworks-knowledge-base/trimming) suppresses ripple without changing the Sync button. It does not itself isolate picture from linked audio, which is why Clip Link matters. Restore your working Clip Link state afterwards.

### Let the timeline ripple with the trim

Set **Sync on** when a one-sided trim should move later material to suit its changed length. To let other unlocked tracks follow, I'd open the picture edge with **Clip Link off and a plain click**, since an Alt trim narrows sync to the clicked track. Move Cut, Slip and Slide preserve sequence length, so Sync does not change those operations.

Watch the amber strips on tracks that should follow. Lightworks can absorb a sync adjustment in black, but the [current troubleshooting guide warns that a track without suitable black can give up media at the trim point](https://lwks.com/lightworks-knowledge-base/troubleshooting-common-problems). Inspect the sound itself as well as its later position. Locked tracks stay behind, as do tracks excluded by Alt-narrowed sync.

An audio edge that stayed closed doesn't mean the whole audio track stayed untouched. Sync can move material or consume media wherever no black absorbs the change. When audio must remain fixed and untouched, I'd lock it deliberately and then check the picture-to-sound alignment.

The **Track Sync strips** are slim amber lines beside the Track Target buttons. They show which tracks will move to stay in sync. **Show Track Sync Indicators** can hide them; inspect that setting before treating an absent strip as proof that a track is excluded.

### Protect audio from any movement

If a sound track must be excluded from both editing and sync movement, use its **Lock**. A [locked track does not participate in edits or trims](https://lwks.com/lightworks-knowledge-base/sequences-and-timelines), including movement to maintain sync.

That protection has a timing cost. Picture can change while the locked sound stays where it was, so the two can drift out of alignment through a ripple. Use Lock when keeping that audio position is the point, then check the result.

## Keyboard trims use enabled track targets

The Alt-click route is for mouse trims. Before a **keyboard** trim, lit Track Target buttons choose which tracks' media opens. With none lit, the default is the top clip under the playhead plus its audio. Turning off the last target restores that automatic choice; it does not choose no tracks.

1. Close any existing trim, place the playhead over the picture clip, then **Shift-click any Track Target** to clear old targeting. Click **V1** to target picture explicitly and confirm that no other target is lit; use the corresponding picture target if the shot is on another track. Locked tracks remain excluded.
2. Choose the downstream behaviour before changing the edge. **Sync off** with the default no-ripple action keeps later cuts fixed. With Sync on, untargeted audio can still follow a ripple; lock sound that must stay untouched.
3. Press **E** for the current clip's out point or **W** for its in point. Inspect the opened picture edge. These are the [factory Trim Out and Trim In assignments](https://lwks.com/lightworks-knowledge-base/keyboard-shortcut-tables); check Settings > Keyboard Shortcuts if you changed them.
4. Use **Left/Right** for a one-frame adjustment, inspect the picture and sound, then press **Tab** to join the trim.

During an open trim, switching a target off makes that track trim black rather than its media. It can still participate in sync. When you join, your pre-trim target setup returns. That temporary trim state is different from clearing all targets before you open it.

[![Before a keyboard trim, V1 explicitly targeted compared with no targets lit; thin amber sync strips remain separate from target buttons.](https://lightworksguide.net/content/images/2026/11/lwg-picture-trim-keyboard-ui-20261116.webp)](https://lightworksguide.net/content/images/2026/11/lwg-picture-trim-keyboard-ui-20261116.webp)

Set V1 explicitly before a keyboard picture trim. With no targets lit and no trim open, the trim key chooses the top clip under the playhead plus its audio. Amber sync strips show a different state from targets.

The factory **key above Tab** toggles Sync. It changes ripple behaviour, not whether the picture and sound are permanently linked.

## Close the trim and check the result

When the edge is right, [close the trim by clicking the cut point, clicking Close under the sequence viewer or pressing Tab](https://lwks.com/lightworks-knowledge-base/trimming). Tab is the factory join/unjoin assignment; use your current binding if it was changed. A trim left open changes what your next interaction does.

- **Picture and sound boundaries:** confirm that the intended picture start or end changed and that the audio edge is where you intended it to be.
- **Later cuts and duration:** compare them with your earlier observations. Fixed downstream positions and a ripple are different outcomes; check that you got the one you chose.
- **Sync at the edit:** play across the boundary and compare a recognisable sound with its picture event. Check followers and track-sync errors as well as the clicked clip.
- **The next edit:** confirm the trim is closed and Clip Link, Sync, Track Targets and locks are in the state you want for continuing work.

Sync warnings are evidence, but they don't give the final verdict. The [clip sync-offset display reports offsets between linked clips from the same source](https://lwks.com/lightworks-knowledge-base/selecting-and-moving-material). A missing warning says nothing about whether unrelated dialogue, music or effects tracks line up with your intended events.

If the result is wrong, undo the change before adding compensating edits. The [factory Undo binding is Ctrl/Cmd+Z](https://lwks.com/lightworks-knowledge-base/keyboard-shortcut-tables). Recheck what you opened, the ripple choice, which tracks may follow and the locks, then make one small adjustment and inspect it again. Stop if you cannot explain the movement.

## If the trim still does something unexpected

- **The audio edge also opens:** confirm that you Alt-clicked the intended picture edge, or used a plain click with Clip Link off. Grouped tracks remain together. Alt trimming narrows the clicked track and sync; it does not use selection's Clip Link inversion rule.
- **The audio moves or changes unexpectedly:** inspect the opened ends, Sync, amber strips, locks and available black. An Alt trim narrows sync; a plain click with Clip Link off does not. Undo and reopen the intended route before adding compensating edits.
- **The picture cannot be edited:** inspect that track's Lock. Avoid clearing every track's protection to solve one local trim.
- **The clip will not extend:** inspect source handles and the neighbouring material. The [material indicators warn when no source footage remains, and trims stop at neighbours by default](https://lwks.com/lightworks-knowledge-base/trimming). Turning on **Allow Trims To Overwrite Segments** lets a trim overwrite adjacent material. That doesn't cure missing source frames, so I'd leave it off here.
- **The controls differ from this guide:** identify your installed build and layout. These instructions follow the current documented v2026 workflow: Alt narrows a mouse trim and its sync; Clip Link affects the partners of a plain-click trim; Sync controls one-sided ripple, subject to Sync Off Action.
- **The clip moves but its edge will not open:** zoom in. A narrow segment can be too small to click its trim zone; a keyboard or Trim-menu command remains available.
- **The sequence duration has not shortened:** another track may still reach the original end. The [trim guide also lists Timeline Resize After Trim](https://lwks.com/lightworks-knowledge-base/trimming); its default off keeps the sequence length. Check the actual last frames and all track tails before expecting a picture-only trim to shorten the whole delivery.

Adding a new shot without its source audio, [muting sound and removing an interior audio range](https://lightworksguide.net/editing/lightworks-remove-audio/) are separate tasks from changing an existing picture boundary. If you're unsure whether the edit needs a roll, slip or slide instead, the [cut-and-trim guide separates one-edge trims, rolling trims, slips and slides](https://lightworksguide.net/editing/cut-trim/).