> ## Content Index
> Fetch the complete content index at: https://lightworksguide.net/llms.txt
> Use this file to discover other available public pages before exploring further.

# Lightworks Sequence Frame Rate: Check the First Clip Before Editing
- URL: https://lightworksguide.net/editing/lightworks-sequence-frame-rate/
- Published: 2026-11-03T09:00:00.000Z
- Updated: 2026-11-17T01:22:58.000Z
- Author: Lucas Bennett
- Tags: editing

For a new Lightworks sequence, choose the delivery frame rate in **Create New Sequence** before adding clips. For an existing edit at the wrong rate, keep the original and use **New > Version..** to make a complete copy at an offered rate. I'd set the rate explicitly for a delivery job: an Auto sequence takes its format from the first clip inserted, which can leave you editing at a different rate from the one you need.

The steps below use the 2026 interface. Importing a video into a bin, inserting it into a sequence and exporting a delivery file are separate events. Check the value at the stage you're trying to change; a project-wide fps setting from an older tutorial isn't the starting point.

## Separate the four frame-rate values

Before changing anything, write down the required delivery rate, the source clip's native rate and the current sequence rate. Keep the exact values: 29.97 and 30 are different choices. The 25 fps shown below is an example, not a recommendation for every project.

| Value               | What it controls                                                               | Where to check                                                                       |
| ------------------- | ------------------------------------------------------------------------------ | ------------------------------------------------------------------------------------ |
| Source frame rate   | The native rate reported by a video file                                       | Info > Metadata > Frame rate, with the intended source selected                      |
| Import default      | The rate assigned to stills and audio, which have no inherent video frame rate | Import panel's cog menu > Default frame rate                                         |
| Sequence frame rate | The fixed rate of one edit                                                     | Choose it when creating a sequence or version; inspect Format on the timeline header |
| Export frame rate   | The delivery file's rate                                                       | Export panel, for the selected source and format                                     |

The [import options assign a default to stills and audio](https://lwks.com/lightworks-knowledge-base/importing-media); they don't rewrite recorded video metadata. Video clips retain their native rate, and supported mixed-rate clips can usually be edited together with playback conformed to the sequence. That makes a mixed-rate edit possible. It doesn't make an export-rate choice a substitute for checking motion and sync.

## Read the source rate before inserting the first clip

1. **Open the intended source.** Double-click its tile or list entry in the bin to load it into the source viewer. Check the clip name before reading any technical value.
2. **Show Info.** If it isn't visible in the fixed layout, use a panel's panel chooser to show it. The [panel chooser controls which tool panels are visible](https://lwks.com/lightworks-knowledge-base/the-lightworks-interface).
3. **Select that individual clip and open Metadata.** Read **Frame rate**. The [Info panel identifies its active source or sequence and lists the native rate as read-only](https://lwks.com/lightworks-knowledge-base/clip-information-and-metadata).

[![Info Metadata showing the example clip Source_01 and a read-only Frame rate of 25 fps](https://lightworksguide.net/content/images/2026/11/lightworks-sequence-source-rate-20261117.webp)](https://lightworksguide.net/content/images/2026/11/lightworks-sequence-source-rate-20261117.webp)

Confirm the clip's identity before reading Frame rate. This is the source's native rate, not the sequence or export setting.

Info follows the active item. Clicking a timeline segment shows that segment's source; clicking black or clearing selection returns to the sequence. With Clip Link on, the individual segment clicked still decides which source is shown. A lasso, Select All or the Selection tool doesn't retarget Info. Recheck the name line when the displayed rate seems wrong.

For stills or audio, open the Import panel's cog menu and inspect **Default frame rate** before importing that material. Audio doesn't have a camera capture rate just because Lightworks displays an assigned fps value. If your sequence will begin with a still, title or audio passage, set its intended sequence rate explicitly instead of relying on that opening to choose it.

## Choose a new sequence or a complete version of the edit

### Set up a new sequence

For a new job with a specified delivery rate, I'd make the sequence first. It avoids discovering a format mismatch after the edit is built.

1. **Create an empty sequence.** Right-click an empty area of a bin and choose **New > Sequence**. In the fixed layout, the Content Manager's three-dot menu also leads to the **New** sequence controls.
2. **Name it and choose Frame rate.** In **Create New Sequence**, select the exact required rate. Review length and video/audio track settings, then click **Create**. The [forum guide's V2026 controls show the manual rate selector](https://forum.lwks.com/threads/creating-new-project-setting-frame-rate.233654/post-233667).
3. **Open the new sequence and inspect its format.** Double-click its tile if needed. Confirm its name and read **Format** on the timeline header before adding the rest of the edit.

[![Create New Sequence dialog with the Frame rate dropdown open and 25 fps selected](https://lightworksguide.net/content/images/2026/11/lightworks-sequence-create-rate-20261117.webp)](https://lightworksguide.net/content/images/2026/11/lightworks-sequence-create-rate-20261117.webp)

Choose the delivery rate before Create. Automatic delegates the initial format choice to the first insertion.

In the flexible layout, right-click the **New sequence** icon and choose **New sequence settings..**. Set **Frame rate**, then click **Set** before creating the sequence. Set confirms those settings; Create makes the sequence in the fixed-layout dialog. The forum guide also notes that a chosen creation rate can carry into later projects, so review it for each new job.

If you use **Automatic**, the [first clip inserted into a new Auto sequence establishes a compatible format](https://lwks.com/lightworks-knowledge-base/sequences-and-timelines). Importing a clip into a bin isn't that insertion. Choose the first timeline clip deliberately, insert it, then inspect the resulting sequence Format before continuing. Don't assume that Auto must select the delivery rate you have in mind.

A required rate missing from the selector is a reason to check the installed version and available format, rather than choose the nearest number. Keep the sequence empty until that is resolved. If an Auto sequence has already taken the wrong format, stop adding material. Use the complete-version route below, or create a new empty sequence at the required manual rate before starting the edit.

### Make a complete version at the required rate

**Keep the original.** Give it a clear name and note its duration, first and last picture, and a few meaningful cut or sync points. The copy is a new working version to compare, not proof that the conversion preserved every part of the edit.

1. **Open the original sequence.** Check its name and rate so you know which edit is being copied.
2. **Right-click the sequence viewer, or use its three-dot menu.** Choose **New > Version..**. The [V2026 Make Version procedure applies to fixed and flexible layouts](https://forum.lwks.com/threads/creating-new-project-setting-frame-rate.233654/post-233667).
3. **Set Region to Whole sequence and Tracks to All.** A marked section or enabled-track subset can leave out material. Give the version a recognisable name.
4. **Choose the required Frame rate under Conversions.** Use an offered rate, then click **Create**. Leave unrelated conversion switches alone for this change.
5. **Open the new version's tile.** Confirm that its name differs from the original, inspect Format on the timeline header, and check that the expected tracks, beginning and ending are present.

[![Make Version dialog with Whole sequence, All tracks and an example Frame rate of 25 fps](https://lightworksguide.net/content/images/2026/11/lightworks-sequence-version-rate-20261117.webp)](https://lightworksguide.net/content/images/2026/11/lightworks-sequence-version-rate-20261117.webp)

Whole sequence and All preserve the intended copy scope. Choose Frame rate separately, then inspect the resulting version.

Older tutorials call this **Make > Copy**; V2025 examples may use **Make copy..** from the viewer's plus menu. Those are historical routes to the copy operation. In the 2026 interface, look for New > Version.. before following an old screenshot click for click.

If the required rate or full-copy scope isn't offered, keep the original and collect the build, layout, source rate and target rate for support. Don't replace the original with a partial version just because that version displays the desired fps.

## Check the complete copy before delivery

The forum's explanation of [changed-rate copies says their cuts are requantised](https://forum.lwks.com/threads/creating-new-project-setting-frame-rate.233654/post-233667). Cuts must fit the new frame grid. I'd compare the picture and sound at meaningful moments, rather than expect matching frame-number labels to prove matching timing. The guide doesn't specify a universal rounding rule.

| Inspect              | Compare with the original                                                                                              |
| -------------------- | ---------------------------------------------------------------------------------------------------------------------- |
| Scope and boundaries | Whole edit, all expected tracks, total duration, first and last picture; no missing sections or new gaps               |
| Cuts and motion      | The action at significant cuts, pans and fast movement; look for an edit that now lands on the wrong moment            |
| Effects and titles   | Transition boundaries, title entrances and exits, fades, and keyframe timing at both ends                              |
| Sound and references | Picture/sound sync, audio nodes, clip/track levels, the audible mix, sync warnings and generated or reference material |

Sound deserves that explicit check. In a [January 2024 rate-copy report](https://forum.lwks.com/threads/creating-new-project-setting-frame-rate.233654/post-274374), a user described moved audio nodes, changed level handling, a broken video-black reference and one-frame sync warnings. It is one report without a stated build, not a defect list for every current version. It provides useful things to inspect; its particular gain adjustment isn't a general repair.

If a cut lands on the wrong action, identify the discrepancy before choosing a [trim, slip or slide](https://lightworksguide.net/editing/cut-trim/). If the issue is silence, use the [no-audio checks](https://lightworksguide.net/fix/no-audio/) to find the silent stage before changing the mix. For widespread timing or reference problems, keep working from the preserved original while you resolve the conversion.

## Confirm the delivery file

Open the Export panel and confirm that its source is the intended version. Select the required frame rate if the chosen format and licence offer it. The [Export panel's resolution and frame-rate controls](https://lwks.com/lightworks-knowledge-base/export-overview) include Same as Source; choose it only when that source already has the format you intend to deliver.

1. Mark a representative section containing motion, a cut or transition, and synchronised sound.
2. Set the export scope to that marked region and export it, then inspect the output file's reported rate and duration. Play it outside Lightworks and watch the movement and sync.
3. Finish the whole-timeline comparison, set the export scope back to the whole sequence, then export and inspect the full delivery file. Keep the original sequence until the result is accepted.

A short sample verifies the delivery path and the passages it contains. It can't certify cuts, titles or audio elsewhere in the edit. The [export settings guide](https://lightworksguide.net/export/settings/) covers the full panel procedure when the source, format or destination is the remaining problem.

## Check the media when the rate change doesn't solve the problem

Phone or screen-recording footage that drifts out of sync needs a source check as well as a sequence check. The [media-format guidance points to Apply VFR correction](https://lwks.com/lightworks-knowledge-base/media-formats-and-technical-settings) in the project's Video settings for variable-frame-rate media. Check that setting when the symptom fits; making a new sequence at a chosen rate doesn't establish that a variable-rate source is behaving correctly.

For intentional slow motion, follow the [clip-speed workflow](https://lightworksguide.net/editing/speed-up-slow-down/). Reading a native rate in Info and choosing an edit's frame rate answer different questions from deciding how fast an action should play.

If the result is still wrong, record the Lightworks build, operating system, layout and licence; the source, original-sequence and requested delivery rates; the options offered; and the first visible or audible discrepancy. Send those details to support with the original preserved. They narrow the problem to a format choice, media behaviour or a changed-rate copy instead of leaving it at “the project's fps is wrong.”